SNOWBOARD RAMP, SLIDES, BOXES AND RAIL PUCKBOARD
NEED PUCKBOARD FOR YOUR SNOWBOARD RAMPS?
WHITE, DURABLE, SLIPPERY, PLASTIC TYPE MATERIAL FOR
YOUR RAMPS, BOXES OR RAILS. PUCKBOARD ALSO USED FOR WAKEBOARD RAMPS AND KITEBOARDING RAMPS.
Puckboard is the same material used on the inside of hockey arenas everywhere throughout North America. It is tough and durable and takes much abuse. It doesn't crack or split or breakdown like many other materials. It is the ultimate for covering your snowboard ramps and boxes. It can be cut with a regular saw and shaved, chiseled or drilled to fit your exacting standards. It is slippery and snowboards slide very well on the surface. Below are the sizes and pricing for our different snowboard ramp Puckboard offerings.
ROLLS 50' long and either:
4" wide ea. x 50' @$27.95
6" wide ea. x 50' @ $37.95
8" wide ea. x 50' @ $49.95
12" wide ea. x 50' @ $65.95
Thickness is approx. 1/8 "
This thickness of Puckboard needs to be screwed to your surface with smaller size screws. Counter sinking is important as well. Daily inspections are necessary to ensure fastening systems have not been
compromised due to ramp activity.
SHEETS
24" x 48"(2'x 4') ea. @ $29.44
48"x 48"(4'x 4') square ea. @ $49.33
16" x 96" (16"x 8')long ea. @ $35.88
48" x 96" (4' x 8' )long ea.@ $82.50
48" x 96" (4' x 8') long ea.
(100 sheets plus) $62.39
48" x 96" (4' x 8') long ea.
(300 sheets plus) $59.21
Available in 1/4" thick. Shown here 16" x 96" to the right.
Puckboard can be screwed. If using screws as your method of attachment, a countersink hole and adhesive in the pilot hole to bring the screw head securely below the boarding surface is advised. Daily inspections are necessary to ensure fastening systems have not been compromised due to ramp activity.
An extra shipping fee of 12.00 will apply for over length packaging, for the 8' lengths only.
Shipping by L.T.L. transport truck for large orders will be necessary and price quotes on shipping will be given at time of order. All 4' x 8' shipments will need to be shipped by methods other than Fed Ex, U.P.S., D.H.L., Purolater or Can Par style couriers. EG: 100 @ 4' X 8' Sheets to B.C. (Victoria) is $656.00 0r $6.56 per sheet additional. Example quote done on April 24 2009.
STRIPS
4' long x 5 1/4" wide ea. @ $7.95
4' long x 10 1/2 " wide ea.@ $15.90
4' long x 15 3/4 " wide ea. @ $22.50
Available in 1/4" thick shown left side are 5 1/4" x 4' and 10 1/2" x 4'
Puckboard can be screwed to your wood box or ramp. If using screws as your method of attachment, a countersink hole and adhesive in the pilot hole to bring the screw head securely below the boarding surface is advised. Daily inspections are necessary to ensure fastening systems have not been compromised due to ramp activity.
F.A.C.T. (FLOATS AROUND CHANGING TEMPERATURE)
We know the F.A.C.T. System will work for backyard boarders who practice there craft with no warping or buckling.
The F.A.C.T. system sample yellow 1/2 " puckboard and white bracket,
are shown in cut view so you may observe the characteristics and
how they fasten. You would build your rail, box or ramp in your preferred
method and fasten the F.A.C.T. system as shown. Current colors of puckboard
available are orange and white. Lengths are 4' and 8' with widths of
5 1/4" and 10 1/2" .
Picture above...new F.A.C.T. (Floats Around Changing Temperatures) system for securing 1/2" puckboard with no glue or screws through the surface. Changes of temperature cause warping and buckling but not with the new F.A.C.T system.
Daily inspections are necessary to ensure fastening systems have not been compromised due to ramp activity.
Currently we are taking orders at our toll free number 1 800 448 6648 or most of this puckboard box and ramp material is on our our order page .
Please note: Puckboard is a petroleum based product and as such is subject to fluctuations in the oil prices we have seen of late. If can not honor our pricing as shown we will advise you at the time of order. |
